WELCOME
Conveyor Companies County Durham
Call us on 0345 017 9765, or alternatively reach out to one of our experts using the form below:
What happens when you fill out our contact form?
Conveyor Companies County Durham – Depending on the product type being handled, there are a wide range of conveyor types that can be used for the handling of boxes, totes, trays, and bags. Selection of the various types of conveyor hardware is dependent on the application and is critical to a successful system design. Some, or all of these conveyor types can be used to provide specific functionality around a system.
The main roller conveyor types are:
Line shaft conveyor is powered by a rotating shaft which runs the length of the conveyor, the conveying rollers are connected to the shaft by a series of drive bands. This approach allows a series of conveyors to be joined together and powered by a single drive motor, allowing, for example, a straight section to be joined to a bend and both to be powered from a single drive motor. Line shaft can provide a cost effective and robust transport solution, and in some cases, using pneumatic stops, also control of product flow.
Belt under roller conveyor (or BUR) is similar to line shaft in the sense that it’s used for runs of transporting product from A to B, however it works slightly differently and is used on straight runs only. BUR uses a narrow drive belt that runs the length of the conveyor, the belt makes contact with the underside of the conveying rollers and drives them from underneath. Where speeds and loadings are above the capacity of line shaft, BUR would be selected.
Gravity (non-driven) conveyor is not powered by a drive motor, typically product moves along this type of conveyor using gravity if the conveyor is slightly declined, or by operators pushing it along. This is by far the most cost-effective hardware choice, it can require operators to push product, but without the need to lift the product.
Zero line pressure accumulation (or ZLP) conveyor is used in areas of a solution that need a high level of product flow control. ZLP conveyor can be broken down into individually driven zones, usually matched to the longest product length, allowing product to be accumulated along any given length of conveyor. ZLP removes line pressure from upstream product, the individually driven zones allow products to accumulate without touching each other. This function allows for applications such as buffering between two processes in a warehouse or factory that run a differing operating speed.
Warehouse Conveyors Belts are capable of high line speed and can handle a wider variety of products. A belt conveyor consists of two or more drums, with an endless loop of belt that rotates around them. Belt conveyors are suitable as inclined or declined conveyor runs, taking products to different heights around a system. Belt conveyors are suitable for handling: boxes, totes, trays, bags, and many other non-uniform products not suitable for handling on roller conveyors.
Vertical conveyors (or lifts) are used for transporting boxes and totes vertically, the most common applications are to transfer products between mezzanine levels in a warehouse or factory, vertical conveyors are most cost effective when multi-level solutions are considered.
Spiral conveyors are used for transporting boxes and totes vertically, usually they are used for a single level change, but more sophisticated spiral solutions are available to take product to and from multiple floor levels. Gravity spiral conveyors or chutes can also be used to take products down to lower levels without the need for powered motors.
Peripherals and accessories are available for box and tote handling systems such as transfers, swivel wheel diverts, pop up blade stops, turning wheels, etc, to incorporate additional functionality into a system.
For your Conveyor Companies County Durham needs, please get in touch with a member of our professional team to discuss your requirements in further detail.
We also offer…
Pallet Conveying Solutions, Euro Pallet Conveyor Solutions, Packaging Solutions, Telescopic Boom Conveyors, Mobile Van Loading Conveyors, Telescopic Conveyors, Flexible Conveyors, Gravity Flexi Roller Conveyors, Belt Conveyors, Preventative Maintenance Plans, Breakdown Support Cover, PLC Software Support Cover, System Healthcheck Inspections & Spare Parts.
You may also be interested in our Conveyor Solutions…
Market Sectors
Warehouse Automation
Warehouse automation is the application of computer software and/or automated machinery to improve the efficiency of logistics operations. Typically, this refers to operations within a warehouse or distribution center, automating tasks such as inventory and stock management, put away, picking, packing, transport of product on a warehouse roller conveyor systems, and sortation. The term intralogistics is commonly used when referring to solutions for the warehouse industry, and the term defines the marriage of software systems to physical automated machinery, allowing businesses to control the physical flow of product around their operations using high level software applications, which provides tracking and status information at all stages of their operations. Intralogistics solutions allow businesses to gain real-time productivity data for their operations, allowing them to identify bottlenecks and problem areas, and collect data about their operation so on-the-spot decisions can be made about stock holding, labour resource, etc. Data can be collected about their operations, so forecasts can be produced for future planning, which is a very powerful tool in a modern warehouse operation.
Warehouse automation systems are comprised of a variety of hardware and software components, some examples of these are as follows:
Automated storage and retrieval systems (ASRS), including pallet cranes, miniload cranes, shuttles, and autonomous mobile robots (AMR). These technologies service a rack(s) of storage locations, allowing many levels of stock to be stacked vertically, and allowing for high storage densities of product, which is automatically stored into and retrieved from the racking when the product is required to be picked. ASRS technologies remove the need for human operators to physically travel to stock holding locations, once picked conveyor systems will then transport the tote, box or pallet of product to an operator for picking, and in the case of AMR systems, the complete rack or pallet of product is brought by the robot to the operator for picking.
Conveyor systems enable the automated movement of products around a warehouse, removing the need for operators to physically move product between locations, which is a non-value adding activity. Containers can enter automated conveyors in one area of the warehouse and, either through hard-coded rules or data input, be moved to a selected destination.
Vertical carousels and lift storage systems are based on paternoster lift or vertical carriage lift technology, allowing for high density vertical storage of small to medium product sizes. This technology is similar to vending machines, but on a larger scale, and can provide a cost-effective solution for the automated storage and retrieval of stock in a warehouse or factory.
Sortation systems enable the sortation of stock items or complete order parcels. Sortation systems are available in a wide variety of hardware options, depending on budget, throughput, and number of sort destination requirements. Automated sortation removes the need for manual operator sortation, massively reducing sort errors through human decision making. Sortation using autonomous mobile robots (AMR), provides a robust system compared with traditional fixed infrastructure type sorters, removing the single point of failure, and providing flexibility and almost infinite expansion possibilities.
Industrial and collaborative robots, typically four and six-axis designs, are used for palletising, de-palletising, packing, and order picking.
Factory Automation
Factory automation is the process of incorporating automated machinery into the manufacturing process of components and products. With automated systems in place, manufacturing businesses have the ability to manufacture and assemble goods without the need for an excessively large human workforce, which could prevent businesses from making profit. The aim of factory automation is to decrease risks associated with laborious and dangerous work faced by human operators, the main advantages of adopting factory belt conveyor systems for factory processes are as follows:
- Remove human operators from dangerous environments
- Remove tasks from human operators, which involve monotonous or hard physical work
- Improve process accuracy
- Increase process throughput and cycle time
- Reduce operating costs
- Increase process resilience
Automated systems in manufacturing environments generally fall into three categories, integrated production lines, robotic systems, and special purpose machines.
Integrated production lines are the most common solution seen in manufacturing environments, these lines are typically adopted to perform a specific set of functions in a process in a specific order, such as bottling lines in a drinks manufacturing environment. Each process stage in the manufacture of a specific product is automated in a linear flow layout, taking raw materials or components and bringing them together to form the finished product.
Robotic systems are common in modern manufacturing environments, their functions can be used to perform a variety of tasks, and due to their flexibility in operation, they can be used for bespoke applications where speed, accuracy, and repeatability is required. Most commonly however, industrial and collaborative robots are used in the following applications:
- Case packing
- Palletising and de-palletising
- Assembly
- Parts manufacturing
- Machine tending
- Welding
Special purpose machines as the name suggests, are machines designed and developed to perform a specific function in a manufacturing operation. The function that requires automating is often very unique, and so “off the shelf” automated machines and solutions are not readily available, and so a machine needs to be developed specifically for that purpose.